Victron Gear
Victron Inverter Chargers
We have significant experience with Victron Systems.
We stock many other Victron devices that are not on this list.
Please call us at 1-803-380-6211 for a free consultation. We can help you find the best system for your needs.
Notes:
In the product title, 48 Volts indicates that the device works with 48 Volts or 51.2 Volts batteries.
24 Volts indicates that the device works with 24 Volt batteries.
If the device is denoted as a 120 Volt device, then two are needed for US Standard Split-Phase 120/240 Volt output.
Ovens, Electric Water Heaters, and light bulbs are typically Resistance Loads.
Electrical Motors such as in Central AC units, room AC units, well pumps, water pumps, etc. are inductive loads.
Inverter style Mini-Splits are typically resistive loads.
Quattro 48 Volt 10000 VA 120 Volt
Inverter Charger
This Inverter-Charger outputs up to 10,000 watts to resistive loads continuously.
For Inductive loads, this Inverter-Charger outputs up to 8,000 watts continuously.
For motor starting, the rating is 20,000 watts
Use two for 20,000 watts to a resistive load and 16,000 for inductive loads. For motor starting, the rating is 40,000 watts.
If more power is needed for a US split-phase 120/240V system, additional pairs of the same model Quattros can be added.
$2,766.75Add to cart
Multiplus-II 48 Volt 5000 VA 120 Volt
Inverter Charger
This Inverter-Charger outputs up to 5,000 watts to resistive loads continuously.
For Inductive loads, this Inverter-Charger outputs up to 4,000 watts continuously.
For motor starting, the rating is 9,000 watts
Use two for 10,000 watts to a resistive load and 8,000 for inductive loads.
With two, for motor starting, the rating is 18,000 watts.
Two are required for US Split-Phase 120/240V loads.
If more power is needed for a US split-phase 120/240V system, additional pairs of the same model Multiplus-II can be added.
$1,458.60Add to cart
Multiplus-II 48 Volt 3000 VA 120 Volt
Inverter Charger
This Inverter-Charger outputs up to 3,000 watts to resistive loads continuously.
For Inductive loads, this Inverter-Charger outputs up to 2,400 watts continuously.
For motor starting, the rating is 5,500 watts
Use two for 6,000 watts to a resistive load and 4,800 for inductive loads.
With two for motor starting, the rating is 11,000 watts.
Two are required for US Split-Phase 120/240V loads.
If more power is needed for a US split-phase 120/240V system, additional pairs of the same model Multiplus-II can be added.
$1,168.75Add to cart
Victron Communication Centers
Cerbo GX MK2 Communication Center
The Cerbo GX MK2 is a highly recommended addition to your Victron System.
This is a very full featured device. It communicates with your Victron components, and this information is sent to Victron’s Remote Management System VRM.
The Cerbo GX has excellent support for controlling Generators. if the Generator has two-wire start capability, then the Cerbo GX can monitor your batteries and then start your generators as appropriate (as programmed by us or you.)
The Cerbo GX also monitors your battery charging centrally, and controller the Inverter-Chargers and all Solar Charge Controllers properly.
This device, and a communications path, such as Wi-FI, Ethernet, or a cellular device, allows you to control your system remotely.
And, most importantly, it enables us to troubleshoot your system and make changes for you upon request.
VRM is a wonderful system that stores detailed data from your system, such as how your solar system is working, your battery voltage and state-of-charge, your power input and output.
You can access VRM via a phone, or a computer, Mac or PC. There is a vast amount of data and information available for you, and us, if you give us permission.
$248.20Add to cart
Touch 70 7″ Touchscreen Display
This is an optional, but desirable addition to your system as it provides a 7″ Touchscreen display for your use locally.
$323.85Add to cart
Victron Solar Charge Controllers
The Victron SmartSolar MPPT RS 450 Solar Charge Controllers are especially desirable for 48/51.2 Volt systems.
These make it exceptionally easy to start up a Victron System.
1. While the sun is shining, press power on the RS 450 Solar Charge Controller.
2. After 30 seconds or so power on your batteries.
3. Power up your Victron Inverter-Charger(s).
This process is so easy. Anyone in a household or business can startup a Victron System easily.
In addition, the RS 450 Solar Charge Controllers are exceptionally good at optimizing the power of solar arrays.
One of our customers was using an all-in-one inverter. He installed one of our RS 450 Solar Charge Controllers and immediately produced more than 30% additional solar power from his solar panels.
Smart Solar MPPT RS 450 200 MC4
This model can produce up to 200 amps of solar power, and it supports 4 strings of solar panels.
$1,938.85Add to cart
SmartSolar MPPT RS 450 100 MC4
This model can produce up to 100 amps of solar power, and it supports 2 strings of solar panels.
$1,108.40Add to cart
SmartSolar MPPT 150/45
The SmartSolar MPPT 150/45 can support 12V, 24V, and 48/51.2V battery systems.
The absolute maximum Voltage that this device can accept is 150 Volts from your solar panel string.
Ideally, the maximum solar panel sting voltage should be less than 145V
The output power can be up to 45 amps.
$218.45Add to cart